Isn’t it bothering you when you see your new pair of native shoes are getting dirty? I know you always want to keep them clean as a new one. But how can you enjoy your beloved shoes while also keeping them looking fresh? The simple trick is to clean them regularly and take care of them. If you are here after your first purchase of Native Shoes and don’t know how to clean Native Shoes, this article is for you.
I know many of you may wonder how to wash native shoes, as these shoes are composed of injection-molded EVA (which produces “rubber-like” material). It is pretty easy to clean native shoes, and you won’t require much time and effort for this.
This article will teach you all you need to know about how to clean natives, which materials native shoes consist of, how to take care of them, etc.
How to Clean Native Shoes?
Native shoes are trendy since they are very cozy and comfortable. Native shoes are waterproof, so people often wear these shoes on rainy days. They also go to sea beaches wearing them. Children use native shoes whole going to the park. As people use it for regular use, these shoes often get dirty.
How to Clean the Outside of Native Shoes:
Step 1: Rub dirt off that is visible. You can execute it even if you’re busy at the moment using a clean cloth, toothbrush, or perhaps even your hand. Washing the dirt off the shoes each time you put them on will help avoid accumulation as well as utilize a lot of your time.
Step 2: Scrubbing with soap. After cleaning the shoes with a cloth, now it is time to apply soap.
• Take a tiny amount of detergent and mix it with slightly warm water.
• Collect an old soft-bristled brush and dip that into the mixture.
• Now gently scrub the outside of the shoes, especially on the stains.
• Let it sit for a while (1-2 minutes)
Note: If you don’t want to use detergent, you can use foaming bleach of any brand instead of a detergent-water mixture.
Step 3: Rinse with water.
• Take 1/2 a mug of water for each shoe and clean them properly.
• Make sure all the bowls are out.
Step 4: Wipe with a dry cloth.
• Take a clean and dry cloth
• Move it around the shoe and wipe out the remaining water.
New-like appearance. Now, your shoes are looking as fresh as the new ones, aren’t they? Keep your shoes in dry places.
Nail Polish Remover Method:
There is another method that is very easy and not time-consuming at all.
• Take your uncleaned native shoes.
• Collect a cotton pad and a nail polish remover.
• Drop a tiny amount of nail polish remover onto the cotton pad.
• Now gently move the cotton pad all around the shoes.
• Rub until the shoes are properly cleaned.
• Now your shoes are ready to wear.
How to Wash the Inside of Native Shoes:
• There are several ways to clean the inside of native shoes. Here’s the most effective one:
• Take ½ teaspoon of detergent and mix it with some water. Try to make a thin paste.
• Take a toothbrush and apply that paste to the toothbrush.
• Rub the brush inside your shoes in rotary motion.
• Clean the shoes with lukewarm water.
• Take a sponge or dry cloth. Make sure that the sponge absorbs all the water.
• Air dry the shoes properly before wearing them.
Note: Use baking soda or white vinegar to get rid of the odor of shoes.
These are the best way to clean Native shoes.
You can also check our guide, how to clean Crocs with Fur inside and how to wash Hey Dude shoes?
How to Disinfect the Native Shoes?
• To disinfect the shoes, first, clean your shoes properly (Both the inside and the outside)
• Now take two drops of isopropyl alcohol in your cotton pad or cloth and scrub your shoes. If you don’t have isopropyl alcohol near you, then you can use any antibacterial spray (Clorox, Lysol).
• Let it dry.
• Now, your disinfected shoes are ready to wear.
Note: After using spray or alcohol, don’t forget to wash your hands with soap.
How to Get a Piece of Gum off A Sole?
There are two methods by which you can remove the gum from your shoes. And they are given below.
For dissolving the gum, follow the below steps:
• Collect a nail polish remover, a cloth.
• Soak the fabric in the nail polish remover.
• Rub the fabric directly on the gum for 5 minutes.
If you don’t have nail polish remover, you can do it in another way.
• Put white vinegar (1/2 cup) in a bowl and heat the bowl until the vinegar becomes lukewarm.
• Gently pour some vinegar onto the gum and let it sit for a while ( 5 to 7 minutes)
• Now rub it with a soft brush in light circular motions.
How to Take Care of Native Shoes?
• After coming from outside, remove dirt that comes with shoes from outside. If possible, make the s clean your shoes. You need not to wash Native shoes with gentle soap every day. Just remove the dust from your native shoes.
• Do not put the native shoes in the dishwasher or the washing machine. Native shoes are manufactured using heat. So there is a possibility of deformation.
• Do not keep your shoes in direct sunlight.
• Please do not keep your native shoes on a car because they are sensitive to heat.
• Sanitize your shoes once a week.
• Avoid using shoe boxes that are made of plastic.
Frequently Asked Questions
What Are Native Shoes?
Native shoes are mostly informal shoes that are flexible, long-lasting, lightweight, and suitable for a variety of activities and circumstances. Native was created with the goal of implying that we are all native to somewhere. Therefore it may be worn by anyone, anywhere.
What Are Native Shoes Made Of?
Native shoes are composed of ethylene-vinyl acetate (EVA). Because of its antibacterial as well as non-toxic qualities, EVA is also found to be safe and environmentally friendly. Other materials are pineapple peel, eucalyptus, and milk of dried hevea. These shoes are vegan-friendly.
Where Are Native Shoes Made?
Native shoes are made in Vancouver, situated in British Columbia, Canada. Nowadays, these items are manufactured in Vietnam and China as well.
How to Stretch Native Shoes?
To stretch your native shoes, you will need a hairdryer, a pair of thick socks. The material of your shoes will expand in response to the size of your feet as a result of the hot air.
• Put on a pair of thick socks and your native shoes.
• Turn on a hairdryer by plugging it in.
• For about a minute, blow hot air into your shoes.
• Walk for at least five minutes on them.
Note: If you don’t have access to a hairdryer, you can leave your shoes out in the hot sun or use a room heater.
We hope that now you have enough information to clean Native Shoes. What is your thoughts on our guide on how to wash Native shoes? Let us know in the comments.